\documentclass[12pt,twoside]{article}
\renewcommand{\baselinestretch}{1}
\setcounter{page}{1}
\setlength{\textheight}{21.6cm}
\setlength{\textwidth}{14cm}
\setlength{\oddsidemargin}{1cm}
\setlength{\evensidemargin}{1cm}
\pagestyle{myheadings}
\thispagestyle{empty}
\markboth{\small{First Author et al.}}{\small{Title First Line}}
\date{}
\begin{document}
\emph{General letters in Mathematics, Vol. 1, No. 2, Dec 2016, pp.
xx-xx}
\emph{Copyright \copyright Science Reflection Publishing, 2016}
\emph{www.sciencereflection.com}
\emph{Available free online at http://}
\centerline{}
\centerline{}
\centerline {\Large{\bf Title First Line}}
\centerline{}
\centerline{\Large{\bf Title Second Line}}
\centerline{}
%% My definition
\newcommand{\mvec}[1]{\mbox{\bfseries\itshape #1}}
\centerline{\bf {First Author, Second Author, and Third}}
\centerline{}
\centerline{Affiliation of the first author }
\centerline{E-mail:}
\centerline{Affiliation of the second author}
\centerline{E-mail:}
\centerline{Affiliation of the third author}
\centerline{}
\newtheorem{Theorem}{\quad Theorem}[section]
\newtheorem{Definition}[Theorem]{\quad Definition}
\newtheorem{Corollary}[Theorem]{\quad Corollary}
\newtheorem{Lemma}[Theorem]{\quad Lemma}
\newtheorem{Example}[Theorem]{\quad Example}
\centerline{\bf Abstract} {\emph{ In this paper, we describe the
formatting guidelines for GLM Journal Submission. The authors must
follow the instructions given in the document for the papers to be
published. You can use this document as both an instruction set and
as a template into which you can type your own text. It is better to
use this template if you are using LaTeX. This template can be used
for initial submission. An abstract should be 100 to 200 words, and
should clearly state the author contribution. Abstracts must not
include bibliographic references.}}
{\bf Keywords:} \emph{Keywords should closely reflect the topic
and characterize the paper. Use about five key words or phrases in
alphabetical order, separated by commas.}
{\bf 2010 MSC No:} Use appropriate MSC Nos.
%=============================
\section{Introduction}
%=============================
We ask that authors follow some simple guidelines. In essence, we
ask you to make your paper look exactly like this document. The
easiest way to do this is simply to download the template, and
replace the content with your own material. This document can be
used as a template for LaTeX file. You may open this document then
type over sections of the document or cut and paste to other
document and then use adequate styles. The style will adjust your
fonts and line spacing. Please set the template for A4 paper (14 x
21.6 cm). For emphasizing please use italics and do not use
underline or bold. Please do not change the font sizes or line
spacing to squeeze more text into a limited number of pages.
%==============================
\section{Problem Formulations}
%==============================
The manuscript should be prepared using LaTeX processing system,
or Microsoft Word 6.0 or later basic font Roman 12pt size. The
papers should be in English and typed in frames 14 x 21.6 cm
(margins 3.5 cm on left and right and 4 cm on top and bottom) on
A4-format white paper or American format paper. On the first page
leave 7 cm space on the top for the journal's headings. The papers
must have abstract, Mathematics Subject Classification and
Keywords
%
\begin{Definition} This is a text of a definition.
$$ax + by + c = 0.$$
\end{Definition}
%
%=============================================
\section{A Step before the Final Submission}
%=============================================
We ask that authors follow some simple guidelines. In essence, we
ask you to make your paper look exactly like this document. The
easiest way to do this is simply to download the template, and
replace the content with your own material.
%==================================
\subsection{Headings and format}
%==================================
Sections and subsections should be numbered as 1, 2, etc. and 1.1,
1.2, 2.1, 2.2 respectively. Capital letters should be used for the
initial letter of each noun and adjective in the section titles,
the section should be formatted as left, bold, times new roman,
and 16pt font size. For subsection (left, bold, times new roman,
and 14pt), the initial letter of first word should be capitalized.
And also similarly for other sub-subsections (left, bold, times
new roman, and 12pt).
%==================================
\subsection{Figures, tables, and equations}
%==================================
A table, figure, equation, and the corresponding text should be
placed on the same page. Otherwise it may be placed on the
immediate following page. Its size should be smaller than the
typed area.
%==============================================
\subsubsection{Labels of figures and tables}
%==============================================
A figure or photo should be labeled with "Fig." and a table with
"Table". It must be assigned with Arabic numerals as a figure or
a table number; the figure number and caption should be placed
below the figure. The first letter of the caption should be in
capital letter. The table number and caption should be placed on
top of the table as shown in Table 1.
Figures and tables should be placed in the middle of the page
between left and right margins. Reference to the figure in the text
should use "Fig." instead of "Figure". In the final formatting of
your paper, some figures may have to be moved from where they
appeared in the original submission. Figures and tables should be
sized as they are to appear in print. Figures or tables not
correctly sized will be returned to the author for reformatting. Do
not include headers, footers or page numbers in your submission.
These will be added when the publications are assembled.
Do not include headers, footers or page numbers in your submission.
These will be added when the publications are assembled.
%
\begin{table}
\begin{center}
\caption{Just an example}
\begin{tabular}{cccc}
\hline
%
\multicolumn{1}{c}{$x$} & \multicolumn{1}{c}{RK4} & ABM \\
%\cline{5-6}
%& & & & \multicolumn{1}{c}{\cite{Ismail-etal04}} &
%\multicolumn{1}{c}{Present work} \\
\hline
0.0000 & 0.000000000 & 0.000000000 \\
0.0938 & $-0.0937935$ & $-0.0937935$ \\
0.2188 & $-0.2186090$ & $-0.2186091$ \\
0.3125 & $-0.3117060$ & $-0.3117064$ \\
0.4062 & $-0.4039390$ & $-0.4039385$ \\
0.5000 & $-0.4948230$ & $-0.4948226$ \\
0.6250 & $-0.6124310$ & $-0.6124315$ \\
0.7188 & $-0.6969410$ & $-0.6969446$ \\
0.8125 & $-0.7770900$ & $-0.7771007$ \\
0.9062 & $-0.8519340$ & $-0.8519654$ \\
1.0000 & $-0.9204760$ & $-0.9205578$ \\
%
\hline
\end{tabular}
\end{center}
\end{table}
%
%==========================
\section{Conclusion}
%==========================
These are the main results of the paper.
%
\begin{Theorem}
This is a text of a theorem.
\end{Theorem}
%
\begin{equation}
ax^2 + bx + c = 0.
\end{equation}
%
\begin{Lemma}
This is a text of a lemma.
\end{Lemma}
%
{\bf ACKNOWLEDGEMENTS.}
This is a text of acknowledgements.
\begin{thebibliography}{99}
\bibitem{1}{Author, "Title of the Paper", \emph{Journal name}, Vol.X, No.X, (200X), pp.XX-XX.}
\bibitem{2}{Author, "Title of the Paper", \emph{Proceedings of the conference name}, Vol.X, No.X, (200X), pp.XX-XX.}
\bibitem{3}{Author, \emph{Title of the Book}, Publisher, (200X).}
\bibitem{3}{A.A. Soliman, A numerical simulation and explicit solutions of
KdV-Burgers' and Lax's seventh-order KdV equations. \emph{Chaos
Solitons Fractals} 29(2) (2006) 294--302.}
\end{thebibliography}
\end{document}